The former device exhibited the best PCE of 0.013% with the Jsc of 77 μA/cm2, while the PCE for the learn more latter suddenly decreased, which may have resulted from the degradation of polymer. Figure 6 XRD spectra (a) and I-V characteristics of P3HT/CIGS NC hybrid PV (b) with and without thermal annealing. (a) devices with and without thermal annealing; (b) P3HT/CIGS NC hybrid PV at different annealing conditions. Conclusions This work investigated and discussed on the bulk heterojunction of solar cell based on the P3HT/CIGS NC hybrid active layer. Approaches such as blend ratios of CIGS NCs, solvent effects on the morphologies, interface between P3HT/CIGS NCs, and device thermal treatments have been investigated
to enhance the power-conversion efficiency of the hybrid solar cells in detail. The best performance of devices was fabricated from a blend ratio of 1 to 3 by weight in P3HT to CIGS NCs, dichlorobenzene as solvent, pyridine as surfactant, yielding the highest PCE of approximately 0.017%. Acknowledgments This research was supported by the National {Selleck Anti-infection Compound Library|Selleck Antiinfection Compound Library|Selleck Anti-infection Compound Library|Selleck Antiinfection Compound Library|Selleckchem Anti-infection Compound Library|Selleckchem Antiinfection Compound Library|Selleckchem Anti-infection Compound Library|Selleckchem Antiinfection Compound Library|Anti-infection Compound Library|Antiinfection Compound Library|Anti-infection Compound Library|Antiinfection Compound Library|Anti-infection Compound Library|Antiinfection Compound Library|Anti-infection Compound Library|Antiinfection Compound Library|Anti-infection Compound Library|Antiinfection Compound Library|Anti-infection Compound Library|Antiinfection Compound Library|Anti-infection Compound Library|Antiinfection Compound Library|Anti-infection Compound Library|Antiinfection Compound Library|Anti-infection Compound Library|Antiinfection Compound Library|buy Anti-infection Compound Library|Anti-infection Compound Library ic50|Anti-infection Compound Library price|Anti-infection Compound Library cost|Anti-infection Compound Library solubility dmso|Anti-infection Compound Library purchase|Anti-infection Compound Library manufacturer|Anti-infection Compound Library research buy|Anti-infection Compound Library order|Anti-infection Compound Library mouse|Anti-infection Compound Library chemical structure|Anti-infection Compound Library mw|Anti-infection Compound Library molecular weight|Anti-infection Compound Library datasheet|Anti-infection Compound Library supplier|Anti-infection Compound Library in vitro|Anti-infection Compound Library cell line|Anti-infection Compound Library concentration|Anti-infection Compound Library nmr|Anti-infection Compound Library in vivo|Anti-infection Compound Library clinical trial|Anti-infection Compound Library cell assay|Anti-infection Compound Library screening|Anti-infection Compound Library high throughput|buy Antiinfection Compound Library|Antiinfection Compound Library ic50|Antiinfection Compound Library price|Antiinfection Compound Library cost|Antiinfection Compound Library solubility dmso|Antiinfection Compound Library purchase|Antiinfection Compound Library manufacturer|Antiinfection Compound Library research buy|Antiinfection Compound Library order|Antiinfection Compound Library chemical structure|Antiinfection Compound Library datasheet|Antiinfection Compound Library supplier|Antiinfection Compound Library in vitro|Antiinfection Compound Library cell line|Antiinfection Compound Library concentration|Antiinfection Compound Library clinical trial|Antiinfection Compound Library cell assay|Antiinfection Compound Library screening|Antiinfection Compound Library high throughput|Anti-infection Compound high throughput screening| Science Council through Grant no. 101-2622-E-007-011-CC2, 101-2622-E-492-001-CC2, NSC 101-2218-E-007- 009-MY3, NSC 100-2628-E-007-029-MY2, NSC 101-2623-E-007-013-IT, and the National Tsing Hua University through Grant no. 102N2022E1, 102N2051E1, and 102N2061E1. Y.L. Chueh greatly appreciates the use of facility at CNMM, National
Tsing Hua University through Grant no. 102N2744E1. References 1. Coakley KM, McGehee MD: Conjugated polymer photovoltaic cells. Chem Mater 2004, 16:4533–4542.CrossRef 2. Cheng Y-J, Yang S-H, Hsu C-S: Synthesis of conjugated polymers for organic solar cell find more applications. Chem Rev 2009, 109:5868–5923.CrossRef 3. Shaheen SE, Radspinner R, Peyghambarian N, Jabbour GE: Fabrication of bulk heterojunction plastic solar cells by screen printing. Appl Phys Lett 2001, 79:2996–2998.CrossRef 4. Krebs FC: Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing. Sol Energ Mater Sol TCL Cell 2009, 93:465–475.CrossRef 5. Zhou Y, Eck M, Kruger M: Bulk-heterojunction
hybrid solar cells based on colloidal nanocrystals and conjugated polymers. Energ Environ Sci 2010, 3:1851–1864.CrossRef 6. Alivisatos AP: Semiconductor clusters, nanocrystals, and quantum dots. Science 1996, 271:933–937.CrossRef 7. Boucle J, Ravirajan P, Nelson J: Hybrid polymer-metal oxide thin films for photovoltaic applications. J Mater Chem 2007, 17:3141–3153.CrossRef 8. Xu T, Qiao Q: Conjugated polymer-inorganic semiconductor hybrid solar cells. Energ Environ Sci 2011, 4:2700–2720.CrossRef 9. Beek WJE, Wienk MM, Janssen RAJ: Hybrid polymer solar cells based on zinc oxide. J Mater Chem 2005, 15:2985–2988.CrossRef 10. Lin Y-Y, Chu T-H, Li S-S, Chuang C-H, Chang C-H, Su W-F, Chang C-P, Chu M-W, Chen C-W: Interfacial nanostructuring on the performance of polymer/TiO2 nanorod bulk heterojunction solar cells. J Am Chem Soc 2009, 131:3644–3649.